Rapid Injection Molded Plastic Type

Max Prototype Limited			Injection Molded Plastic Type And Physical Property

Max Prototype Applies most of plastic material list below in our rapid injection molding process based on customer specific requirement. The physical property list below is for reference only and the actual physical property may vary from different material providers. As for material type, there are also various level/grade, different application and modified type available per customer requirement.
工程塑料 Engineering Plastic	简称 Code	英文学名 English Name	中文学名 Chinese Name	比重 Density	模塑收缩% Shrink Rate%	焗料C hrs/Baking Temperature	料筒温度C /Material Temperature	模具温度C/ Mold Temperature
	简称 Code	英文学名 English Name	中文学名 Chinese Name	比重 Density	模塑收缩% Shrink Rate%	焗料C hrs/Baking Temperature	料筒温度C /Material Temperature	模具温度C/ Mold Temperature
	PA-尼龙单6	Polyamide-6	聚先胺-6	1.13	0.7-1.0	80*4	250-270	40-60
	PA-66尼龙行6	Polyamide-66	聚先胺-66	1.13	1.3	80*4	280-300	40-60
	PA-66+30%GF	Polyamlde-66+30%Glass Fiber	聚先胺-66+30%纤维	1.39	0.3	70*4	240-270	80-90
	POM宝钢	Polyacetel	聚甲醛	1.42	2.1	100*2	205-225	80-100
	PC	Polycarbonate	聚碳酸酯	1.2	0.5	130*4	271-293	71-93
	PET	Polyethylene Terephthslate)	聚封苯二甲酸乙二醇酯	1.33	0.4	154*6	277-293	15-30
	PET+30%GF	PET+30%Glass Fiber	同上+30%纤维	1.67	0.2	135*4	265-305	95-150
	PEDG	CHDM Modified Co polyester	改性聚酯	1.27	0.2-0.5	70*5	250-270	15-40
	PCDG	CHDM Modified Co polyester	改性聚酯	1.23	0.2-0.5	70*5	275-295	15-40
	PBT	Poly(Butylene Terephthslate)	聚封苯二甲酸丁二醇酯	1.4	1.5-2.2	130*3	225-245	40-80
	PCT+30%GF	PBT+30 Glass Fiber	同上+30%纤维	1.61	0.4-0.9	130*3	225-250	40-100
	PBT+30%GF	Poly cyckohexylenedimethyiene Rerephtbalate	改性聚酯	1.45	0.0-0.4	120*4	295-370	105-135
	CA酸性胶	Cellulose Acetate	醋酸纤维素	1.26	0.5	70*4	160-230	40-60
	CAP	Cellulose Acetate Propionate	丙酸纤维素	1.2	0.5	70*2	215-240	40-75
	CAB	Cellulose Acetate Butyrate	丁酸纤维素	1.19	0.5	70*2	230-250	40-85
	耐高温PP	High Heat Polypropylene	耐高温聚丙烯	1.12	0.9-1.1	80*2	180-220	60-80
	防火PP	Flame Retarded Polypropylene	防火聚丙烯	0.95	1.4	85*2	180-220	30-50
	PPS+40%GF	Polyphenylene Sulfide	聚苯硫醇+40纤维	1.67	0.25	140*3	300-340	120-150
	PPO	Polyphenylene Oxide	聚苯烯	1.07	0.5-0.8	110*3	270-310	70-93
	PSU	Polysulfide	聚砜	1.24	0.5	130*4	330-360	120-160
	PES	Polyether Sulfide	聚醚烯	1.37	0.68	150*2	340-380	120-160
	LCP	Liquid Crystal Polymer	液晶聚合物	1.7	0.02	140*5	385-400	35-200
	SBS弹性体	Styrene-butadiene-styrene block copolymer	苯乙烯嵌段共聚物	0.96-1.10	1.5	50*3	145-460	25-30
	SEBS弹性体	Styrene-ethylene-butadiene-styrene block copolymer	氢化苯乙烯嵌段共聚物	0.87-0.91	1.6	50*3	180-200	35-65
	TPU	Thermoplastic Polyurethane	氢塑性聚氢酯	1.24	1.2	100*3	190-220	21-49
	TPV	Thermoplastic Yulcanicate	完全碳化素烯经弹性体	0.97	0.5-2.5	75*2	180-190	10-80
	COP	Polyester Elaslomer	聚酯弹性体	1.2	1.4	110*2	220-250	45
通用塑料 General Plastic	GPPS硬胶	General Purpose Polystyrene	通用聚苯乙烯	1.16	0.3-0.6	70*2	200-250	40-60
	HIPS不碎胶	High lonpatel Polystyrene	高冲击聚苯乙烯	1.08	0.5	70*2	210-270	20-50
	ABS	Acrylonitnite Buladiene Styrene	丙烯腈.丁二烯.苯乙烯	1.05	0.6	80*3	210-260	50-80
	AS（SAN）料	Acryhomitnite Styrene	丙烯腈.苯乙烯	1.07	0.6	80*3	220-270	40-80
	BS（K胶）	Buladiene Styrene	丁二烯．乙烯	1.01	0.5	70*2	190-230	30-50
	LDPE软胶	Low Density Polyethylebc	低密度聚乙烯	0.92	3	65*1	220-260	20-40
	HDPE行力士	High Density Polyethylebc	高密度聚乙烯	0.96	3	65*1	190-280	30-70
	EVA	Eolrylene-Vinyt Acetate	乙烯醋酸乙烯脂	0.95	2	65*1	140-200	20-40
	PVC硬胶	Polyvioyl chloride	聚气乙烯	1.38-1.41	1.5	60*1	170-190	20-40
	PP有折胶	Polypropylene	聚丙烯	0.91	2	60*1	210-230	20-50
	PMMA亚加力	Polyethylene Methacrylale(Acrytic)	聚甲基丙烯酸甲酸	1.18	0.6	75*2	220-240	60-80

Max Prototype Limited- Controlled Document/中山市菲德尔模型技术有限公司-受控文件